Supermicro X10QBL-4CT User Manual page 15

Motherboard Features
CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Quad Intel E7-4800 V3 (Socket R1) series proces-
®
sors; each processor supports dual full-width Intel
QuickPath Interconnect (QPI) links (of up to 8.0 GT/s
one direction per QPI)
Note: For the latest CPU support updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
•
Integrated memory controller supports:
Up to 1TB of Registered (RDIMM) or up to 4TB
of Load Reduced (LRDIMM) DDR4 (288-pin) ECC
1866/1600/1333 MHz memory modules in 32 slots (2
DIMMs per channel).
Note: Memory speed support is pending on the
CPUs installed in the system. For the latest
memory updates, please refer to our website
at http://www.supermicro.com/products/moth-
erboard.
DIMM sizes
•
DIMM Up to 128 GB @ 1.2V
•
Intel® PCH C602J
•
Two (2) PCI-E 3.0 x16 slots (CPU1 Slot1, CPU2
Slot3)
•
Two (2) PCI-E 3.0 x8 slots (CPU2 Slot2, CPU2 Slot4)
•
Graphics controller via ASpeed AST2400 BMC
(Baseboard Controller)
•
Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet con-
troller for LAN Port 1/Port 2 (X10QBL-4 only),
•
Intel X540 10-Gigabit Ethernet controller for 10G-
LAN (TLAN) Port1/Port 2 (X10QBL-4CT only)
•
ASpeed 2400 Baseboard Controller (BMC) supports
IPMI_LAN 2.0
SATA Connections
•
SATA Ports
1-7
Chapter 1: Overview
•
Two (2) SATA 3.0 ports w/
SuperDOM support (I-SATA
1/2) (from Intel PCH)
•
Four (4) SATA 2.0 connec-
tions (I-SATA 2-5) (from Intel
PCH)