Sas Hdd Status Support Enable (For X10Qbl-4Ct Only) - Supermicro X10QBL-4CT User Manual

X10QBL-4CT/X10QBL-4 Motherboard User's Manual
SAS HDD Status Support Enable
(for X10QBL-4CT only)
Put a cap on Jumper JPSAS1 to enable
onboard SAS HDD status support on the
X10QBL-4CT. The default setting is to
disable this function by keeping the cap
off from the jumper. See the table on the
right for jumper settings.
LEDBMC
BMC
BMC
LAN CTRL
JPTG1
JBT1
USB4/5
USB6/7
PCH
PCH
BIOS
BT2
CMOS
CLOSE 1st
CPLD
Battery
A
OPEN 1st
SAS CTRL
SAS CTRL
CPU1
JPWR5
JPWR4
JPS4
JPS1
JPWR3
USB8
SP1
JPI2C1
JPWR2 JPWR1
UID USB0/1
VGA USB2
LED1
IPMI_LAN
LAN1/2
FAN10
MAC CODE
IPMI CODE
BAR CODE
SAS CODE
X10QBL-4(CT)
Rev. 1.01
CPU2
CLOSE 1st
OPEN 1st
CLOSE 1st
FAN7
2-36
SAS HDD Status Support Enable
Jumper Settings
Jumper Setting
On
Off
COM1
FAN9
FAN8
IB CODE
CPU4
OPEN 1st
OPEN 1st
CPU3
CLOSE 1st
LED15
JF1
LEDPWR
FAN1
Definition
Enabled
Disabled (Default)
J P S A S 1
A .
( X 1 0 Q B L - 4 C T
only)