Supermicro X10QBL-4CT User Manual page 45

Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of JF1 to use the Overheat/Fan Fail/
Power Fail and UID LED connections.
The red LED on pin 8 provides warn-
ings for overheating, fan failure or
power failure. The blue LED on pin
7 works as the front panel UID LED
indicator. Refer to the table on the
right for pin definitions.
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
IPMI CODE
BAR CODE
SAS CODE
X10QBL-4(CT)
IB CODE
Rev. 1.01
Pin#
7
8
Ground
X
FP PWRLED
HDD LED
NIC1 Link LED
NIC2 Link LED
OH/Fan Fail/
A
PWR Fail LED)
Power Fail LED
B
Ground
Ground
2-23
Chapter 2: Installation
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions (JF1)
Definition
Blue_UID LED
OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Definition
Off Normal
On Overheat
Flashing Fan Fail
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
A. OH/Fail/PWR Fail LED
B. PWR Supply Fail
20 19
NMI
X
3.3 V
UID Switch
NIC1 Activity LED
NIC2 Activity LED
UID LED
3.3V
Reset
Reset Button
Power Button
PWR
2 1