Supermicro X10QBL-4CT User Manual page 36

X10QBL-4CT/X10QBL-4 Motherboard User's Manual
Memory Support for the X10QBL-4(CT) Motherboard
The X10QBL-4(CT) Motherboard supports 288-pin DDR4 ECC memory of up to 1TB
of Registered (RDIMM) or up to 4TB of Load Reduced (LRDIMM) 1866/1600/1333
MHz modules in 32 slots (2 DIMMs per channel). For the latest memory updates,
please refer to our website a at http://www.supermicro.com/products/motherboard.
Processor & Memory Module Population Configuration
For memory to work properly, follow the tables below for memory installation.
Fully-Populated Configuration
Please follow the instructions below to populate all DIMM slots:
Processors and their Corresponding Memory
CPU#
CPU 1
(P1M1-)
CPU2
(P2M1-)
CPU3
(P3M1-)
CPU4
(P4M1-)
Half-Populated Configuration
Please follow the instructions below to populate half of the DIMM slots:
•
An Important Note: For the memory modules to work properly, please install
DIMM modules of the same type, same speed, and same operating frequency
Modules
Corresponding DIMM Modules for Full-Populated Configura-
P1M1- P1M1-
DIMM A1/B1 DIMM C1/D1
P2M1- P2M1-
DIMM A1/B1 DIMM C1/D1
P3M1- P3M1-
DIMM A1/B1 DIMM C1/D1
P4M1- P4M1-
DIMM A1/B1 DIMM C1/D1
Processors and their
Corresponding Memory
Modules
CPU# Corresponding DIMM
Modules for Full-Populated
Configuration
CPU 1 P1M1-
(P1M1-) DIMM A1/B1
CPU2 P2M1-
(P2M1-) DIMM A1/B1
CPU3 P3M1-
(P3M1-)
DIMM A1/B1
CPU4 P4M1-
(P4M1-) DIMM A1/B1
2-14
tion
P1M1- P1M1-
DIMM A2/B2 DIMM C2/D2
P2M1- P2M1-
DIMM A2/B2 DIMM C2/D2
P3M1- P3M1-
DIMM A2/B2 DIMM C2/D2
P4M1- P4M1-
DIMM A2/B2 DIMM C2/D2
P1M1-
DIMM C1/D1
P2M1-
DIMM C1/D1
P3M1-
DIMM C1/D1
P4M1-
DIMM C1/D1