Motherboard Installation - Supermicro X10QBL-4CT User Manual

2-3

Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
•
Phillips Screwdriver
•
Pan head screws (14 pieces)
•
Standoffs (14 pieces, if needed)
Location of Mounting Holes
There are fourteen (14) mounting holes on this motherboard indicated by the circles.
LEDBMC
BMC
BMC
JBT1
USB4/5
USB6/7
PCH
PCH
BT2
CMOS
CPLD
Battery
SAS CTRL
SAS CTRL
JPWR5
JPWR4
JPS4
JPS1
JPWR3
USB8
SP1
JPI2C1
JPWR1
JPWR2
Caution: 1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to prevent damaging those components when installing the
motherboard to the chassis.
UID
LED1
LAN CTRL IPMI_LAN
LAN1/2
FAN10
JPTG1
X10QBL-4(CT)
BIOS
Rev. 1.01
CPU2
CLOSE 1st OPEN 1st
OPEN 1st
CPU1
FAN7
USB0/1
VGA USB2 COM1
FAN9
MAC CODE
IPMI CODE
BAR CODE
SAS CODE
IB CODE
CLOSE 1st
OPEN 1st
CPU3
CLOSE 1st
2-5
Chapter 2: Installation
FAN8
CPU4
OPEN 1st
CLOSE 1st
LED15
JF1
LEDPWR
FAN1