Supermicro X10QBL-4CT User Manual page 96

X10QBL-4CT/X10QBL-4 User's Manual
Trusted Computing (Available when a TPM device is detected
by the BIOS)
Configuration
Security Device Support
Select Enabled on this item and enable the TPM jumper on the motherboard to
enable onboard security devices to improve data integrity and network security.
The options are Enabled and Disabled.
TPM (Trusted-Platform Module) State
Select Enabled to enable TPM security settings to improve data integrity and
network security. The options are Disabled and Enabled.
Pending Operation
Use this item to schedule an operation for the security device. The options are None,
Enable Take Ownership, Disable Take Ownership, and TPM Clear.
Note: The computer will reboot in order to execute the pending commands
and change the state of the security device.
Current Status Information: This item displays the information regarding the
current TPM status.
TPM Enable Status
This item displays the status of TPM Support to indicate if TPM is currently
enabled or disabled.
TPM Active Status
This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.
TPM Owner Status
This item displays the status of TPM Ownership.
TXT Support
Select Enabled for Trusted Execution Technology support. The options are Enabled
and Disabled.
ME (Management Engine) Subsystem
This feature displays the following ME Subsystem Configuration settings.
General ME Configuration
Operational Firmware Version
4-26