Opening The Cover - ABB PVS-120-TL Quick Installation Manual

7.
• Fasten all of the four side closures (latches)
A

OPENING THE COVER

• Open the cover and use the cover support brackets
in open position.
Pay attention to properly secure the cover support brackets
as shown it the pictures.
06
B
• Using the key tool provided with the inverter installation kit content in the
wiring box package, open the three cover quarter cam locks
proper ways as shown in the related silkscreens on the cover.
• (only for -SX2, -SY2 version) Set the wiring box disconnect switch
OFF position; otherwise it will not be possible to remove the front cover
to lock the cover
14
in order to avoid falling of the cover!
14
- 11 -
A
EN
06
following the
05
B
to
09
.
07
14