Table of Contents
Advertisement
Spectral PC 1800Z IP
8.3. Color
With this menu, you can adjust the color calibration functions.
01) While in SETTING menu, press the UP/DOWN buttons to choose COLOR.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 3 options: RGBW, OFF, UC
04) If you have chosen RGBW, then RGB to WHITE is active. This means RGB = 255, 255, 255. The displayed
color is the one which you set in CALIB. C > RGBW menu (10. Calibration, page 20).
05) If you have chosen OFF, the RGB values are not adjusted and the output is the most powerful.
06) If you have chosen UC, the RGB output is adjusted to a standard preset universal color. In this way,
different Spectral versions are color-balanced in order to match each other.
8.4. Dimmer
With this menu, you can adjust the dimmer.
01) While in SETTING menu, press the UP/DOWN buttons to choose DIMMER.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (DIM1-DIM4, from fast to
slow) and OFF.
04) If you choose OFF, then RGBW and the master dimmer will be linear.
8.5. DMX Error
With this menu, you can determine the device's behaviour in case of a DMX signal error.
01) While in SETTING menu, press the UP/DOWN buttons to choose DMX ERROR.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options: BLACK and SAVE.
04) If you have chosen BLACK, the Spectral will black the output out, in case of a DMX signal error.
05) If you have chosen SAVE, the Spectral will fall back on the last working DMX signal, which will ensure
undisrupted performance.
8.6. PWM rate
With this menu you can set the PWM rate.
01) While in SETTING menu, press the UP/DOWN buttons to choose PWM.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired PWM frequency. The available options are: 600 Hz,
1200 Hz, 2000 Hz, 2400 Hz, 6000 Hz, 25000 Hz.
04) The higher the PWM frequency, the lower the dimmer's grayscale.
8.7. Color temperature
With this menu you can set the color temperature.
01) While in SETTING menu, press the UP/DOWN buttons to choose FULL_POWER CCT.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired color temperature. The available options are:
3200K, 4200K, 5600K, NORMAL.
9. Safety lock
With this menu you can select whether the safety lock is active.
01) While in the main menu, press the UP/DOWN buttons to choose KEY.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between ON and OFF.
04) If you have chosen ON and when the display turns off after remaining idle for 25 seconds , you will
need to insert the password in order to access the main menu (press the buttons in the following
order: UP,DOWN,UP,DOWN and press the ENTER button to confirm).
05) If you have chosen OFF, the main menu will remain unlocked.
Ordercode: 43553
19
Advertisement
Table of Contents
