Table of Contents
Advertisement
Performer 2500 Fresnel Tungsten
Dimmer
In this submenu you can adjust the dimmer speed.
01) Select DIMMER and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to choose one of the following options:
●
DIM 1, DIM 2, DIM 3, DIM 4: non-linear dimmers, from fast to slow
●
OFF: linear dimmer
Press the ENTER button to confirm your choice.
Dimming Curves
In this submenu you can set the dimming curves.
01) Select CURV and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to choose one of the following options:
●
CV1, CV2, CV3: non-linear curves
●
OFF: default dimming curve
Press the ENTER button to confirm your choice.
DMX Error
In this submenu, you can determine the behavior of the device in case of a DMX failure.
01) Select DMX ERROR and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to toggle between the following 2 options:
●
SAVE: in case of a DMX signal failure the device will use the last properly received DMX signal
ensuring uninterrupted performance
●
BLACK: in case of a DMX signal failure the device will black out the light output
Press the ENTER button to confirm your choice.
PWM Rate
In this submenu you can set the PWM (Pulse Width Modulation) frequency.
01) Select PWM and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to choose the desired PWM frequency. The available options are: 600 Hz,
1200 Hz, 2000 Hz, 4000 Hz, 6000 Hz and 25000 Hz.
Note: The higher the PWM frequency, the lower the dimmer's grayscale.
Press the ENTER button to confirm your choice.
Product code: 33141
28
Advertisement
Table of Contents
