Remove Optical Modules - Cisco NCS 1001 Hardware Installation Manual
Hide thumbs
Also See for NCS 1001:
- Manual (8 pages) ,
- Configuration manual (36 pages) ,
- Start manual (40 pages)
Table of Contents
Advertisement
Remove Optical Modules
Remove Optical Modules
Use this procedure to remove the optical modules.
Procedure
Step 1
Unfasten the captive screws in anti-clockwise direction.
Step 2
Use the ejector lever to pull the module outside.
Step 3
Once the module is partially out, pull the module from the chassis.
Figure 47: Remove Optical Modules
1
2 and 3
Hardware Installation Guide for Cisco NCS 1001
50
Ejector lever
Captive screw
Replace Cisco NCS 1001 Components
Advertisement
Table of Contents
