Software Preparation; Test Steps Of Device Default Parameters; Connecting The Hardware; Device Parameter Configuration - Ebyte NB183 User Manual

Eight serial port server

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

NB183S&NB183_User Manual

2.2 Software Preparation

Serial debugging assistant (XCOM), network debugging assistant (TCP/IP debugging assistant), Ebyte network

configuration tool (configuring the host computer), official website address: www.ebyte.com, product details provide

download interface.

Network Assistant

XCOM

亿佰特网络配置工具

[Note] The host computer displayed in the manual may be different from the superior version provided on the official

website. The host computer provided on the official website shall prevail.

Different channels use the same IP and different local ports. For example, the factory-configured channel 1 corresponds

to port 8001 and channel 8 corresponds to port 8008 in turn. For details, see the "Correspondence between Channels and

Serial Ports" chapter.

1. Use a network cable to connect the serial port server network port and the computer network port;

2. Use a USB to RS485 serial cable to connect the USB port of the computer and the RS485 interface of the serial server;

3. Use the power adapter (DC 8-28V) to power on the device, and observe whether the indicator light is normal after

power-on, refer to "Indicator Indicator";

4. After confirming that there is no problem with the status, proceed to the next configuration;

In order to enable users to quickly have a simple understanding of the serial port server, we use the default parameters of

the serial port server to conduct data transparent transmission test. The default parameters of the NB183 serial server

device are shown in the table below.

Project

default parameters

Table of Contents