Pre-Operation Inspection; Recommendations; Working Area Assessment - Haulotte STAR 10 Operator's Manual

STAR 10 - STAR 26J
C

- Pre-operation inspection

Pre-operation inspection

1 - Recommendations

The owner, the site manager, the supervisor and the operator are all responsible to ensure the machine
is fit for the work it is to perform; i.e. that the machine is suitable to carry out the work in complete safety
and in compliance with this Operator's Manual. All managers who are responsible for persons
operating the machine must be familiar with the local regulations currently applicable in the country of
use and ensure that they are adhered to.
Before using the machine, read the previous chapters in this manual. Ensure that you have understood
the following points :
• Safety precautions.
• Operator's responsibilities.
• Conditions and the operating principles of the machine.

2 - Working area assessment

Before any operation :
• Carry out a thorough inspection of the site to identify any potential risks within the work zone.
• Take the necessary precautions to avoid collisions with other machinery within the work zone.
Ensure that :
• The weather conditions (wind, rain, etc.) allowing the machine to be used.
• The ground withstands the weight of the machine and has not been affected by the poor weather conditions.
• Check that the authorisations to work with the machine on the site in question have been obtained
(.g. chemical product factories).
• Define a rescue plan for all the risks, including the risk of falls and crushing.
4001178810 E 10.22 USA / GB
A
B
C
D
E
F
G
H
I
51