Safety Functional Checks; E-Stop Button Check; Activation Of Controls - Haulotte STAR 10 Operator's Manual

STAR 10 - STAR 26J
C
- Pre-operation inspection

4 - Safety functional checks

To protect the user and the machine, safety systems prevent the movement of the machine beyond its
operating limits. These safety systems when activated immobilize the machine and prevent further
movement.
The operator must be familiar with this technology and understand that is not a malfunction but an
indication that the machine has reached an operation limit.
Aerial Work platforms are equipped with two control boxes which allow operators to safely use the
machine. An auxiliary system (Overriding system) is available on the ground control box in order to
rescue anyone trapped on the platform.
The following checks describe the operation of the machine and the specific controls required.
For the location and description of these controls :
box and B 3.3 and D 3 - Platform control box.
4.1 - E-S
TOP BUTTON CHECK
Step
1 Pull the E-stop buttons (15, 46).
2 Turn the control box activation selector key ( 92 ) downwards to activate the ground control box.
3 The screen turns on.
4 Push the E-stop button ( 15 ). The screen turns off.
Step
1 Pull the E-stop buttons (15, 46).
2 Turn the control box activation selector key ( 92 ) upwards to activate the platform control box.
3 The screen turns on.
4 Push the E-stop button ( 46 ). The display panel goes blank.
4.2 - A
CTIVATION OF CONTROLS
The enable switch must be actived to allow any movement.
The "Enable Switch" system depends on the machine configuration and will consist of one of
the following :
• Joystick trigger at platform box (if fitted).
• Foot pedal (enable switch) in the platform.
• Enable switch at ground and platform boxes.
4001178810
Ground control box E-stop button
Platform control box E-stop button
E 10.22
refer to section B 3.2 and D 2 - Ground control
Action
Action
USA / GB
A
B
C
D
E
F
G
H
I
55