Electric Brake Release - Haulotte STAR 10 Operator's Manual

STAR 10 - STAR 26J
D
- Operation instructions

5.4.1 - Electric brake release

To tow a broken-down machine, release brake.
Perform these operations on flat, horizontal ground. Failing that, block the wheels to immobilize the
machine. During brake release operation, the machine is in free wheel mode and the brake system no
longer functions.
In the event of machine traction, the drive wheels brake release is available via the switch
located on the lower end of turret. It is accessible by opening the left hand compartment.
To release the machine's brakes, the following conditions must be met :
• The platform control box or the ground control box must be selected.
• The machine must be completely stowed.
• No movement selected.
• The machine must not be tilted.
Push the brake release button located on the inside bottom of the compartment for at least 3
s. An audible signal (beep) sounds.
Releasing the button disengages the brakes.
The brake release procedure stops automatically if the brake release button is pushed again,
any actions are taken at the control boxes, the machine is turned off, or the control box in use
is changed.
74 4001178810 E 10.22 USA / GB