If you cannot detect the IP address on your network, use the following alternate method. This method
requires software to be loaded on a computer.
1. Download and install the DSU software and finish using the setup wizard. Software is available
at https://www.solidstatecontrolsinc.com/knowledgecenter/software.
2. Open the DSU software.
3. Select search and wait for device to be found.
4. Select the device and press unlock, and enter the username and password to unlock the device
(default: username-admin, password-moxa)
5. After unlocked, right click the device, and select "Assign IP", where the IP and mac address can
be changed to desired values.
6. Change the IP and Netmask to desired values. When done, press ok to continue.
`
Ascend Single Phase Charger Operation Manual
47
95-100167 Rev A