Ascend Single Phase Charger Operation Manual
6.6.6. Password
Supervisor passwords are intended to be used for individuals authorized to change parameters of the
system as well as monitor and download event logs. The default password is "1962".
The Set Password Screen allows the password to be modified. The password can be between 4 and 10
digits long. The user will be asked to confirm the new password before it is applied.
Figure 22: Set Password Screen
6.6.7. Language Setting
The Language Screen allows the user to change the language if the User Interface between English and
Spanish. The language change will not take effect until the new setting is saved.
6.6.8. System Information
The Set System Information Screen Allows the system's Client Name and Site ID text values to be viewed
and modified. Pressing either text box will display a keyboard that can be used to change the value. The
new value must be saved to take effect.
This information will be used on system and data log reports.
6.6.9. Advanced Diagnostics
This screen list design diagnostics information used to assist trouble shooting with AMETEK Solidstate
Controls.
95-100167, Rev A
32