Ametek ASCEND Series Operation Manual page 47

Single phase modular charger
Table of Contents

Advertisement

When you are viewing the Web page on an external browser and the device loses connection for more
than 90 seconds with the Charger, the web age will notify Ethernet Loss of Comm. This notification is not
reflected on the Charger system.
Datalog Reports can be downloaded in three different formats:
o Standard data log with the event name, date, and time only.
o Extended data log with addition system readings at the time the event occurred.
CSV (Comma-Separated Values) data log with same information as extended data log.
7.7.5.2. Network Addresses
The Ethernet Settings Screen displays the network configurations for the system. The network
configurations can be modified using the Ether Setting Screen. In Setup -> Network Settings.
Figure 30: Network Settings Screen – Ethernet Settings
Ascend Single Phase Charger Operation Manual
43
Meters
Alarms
Data Log
Data Store
I/O Terminal
Pause/Play
Settings
95-100167 Rev A

Advertisement

Table of Contents
loading

Table of Contents