Table of Contents
Advertisement
Ascend Single Phase Charger Operation Manual
To mount the 20A & 40A Ascend Charger on the floor, an optional floor mounting stand is required. The
kit includes:
Part #
Description
70-122743-90
Stand sides
70-122744-90
Stand brace
03-400041-00
1/4-20 x 1/2 Self-forming
screw
03-400042-00
#10-24 x 1/2 Self-forming
screw
Assemble the stand sides and braces as shown using the
1/4-20 x 1/2" tread-forming screws. The 1/4" Self-
Forming screws should be torqued to 5-6 ft-lb.
Once the stand is assembled, mount the charger on the
stand. Use the #10 screws to fasten the charger to the
stand from underneath the stand in the four corners,
torque to 30-32 in-lb.
Reference Appendix D:20A & 40A Outline for dimensions.
95-100167, Rev A
Figure 1: Conduit Entry Location
Qty
2
6
24
4
10
Advertisement
Table of Contents
