Table of Contents
Advertisement
Use Middle
Set Of
Mounting Holes
Figure 2-5c
(4) 1/2"-13 x 1-1/4" HHCS
(4) 1/2"-13 Locknuts
Use Front
Set of Holes
Main Frame
Assembly
2-6 Box Handle Assembly Installation
NOTE: Before continuing the lift handle installation, have someone assist you in turning the grass container
upside down. Insert (1) 3/8"-16 x 2" HHCS P#(K1208) into the Box Handle Assy. P#(A0897) and secure with
(1) 3/8"-16 flange nut P#(K1215). Thread the flange nut onto the bolt upside down, as shown in Figure 2-6a.
Figure 2-6a
Secure With
Insert (1) 3/8"-16 x 2"
(1) 3/8"-16 Flange Nut
HHCS Into The Lift Handle
9
Advertisement
Table of Contents
