Table of Contents
Advertisement
2-1 Outer Engine Mount Tube
Installation
Attach (2) Outer Engine Mount Brackets P#(B0569) to
the rear frame of the mower in the position and
orientation shown in Figure 2-1a and 2-1b, using (2)
3/8"-16 x 2-1/4" x 1-3/4" U-Bolts P#(K1436) and (4) 3/8"-
16 Ny-Flange Locknuts P#(K2038) PER BRACKET.
Leave the hardware finger tight until the blower
assembly has been installed and positioned correctly.
Secure the Outer Engine Mount Tube P#(B3727) to the
Outer Engine Mount Brackets using (2) 3/8"-16 x 2-1/8" x
2-5/8" U-Bolts P#(K1119) and (4) 3/8"-16 Ny-Flange
Locknuts P#(K2038). Leave the hardware finger tight
until the Blower Assembly has been installed. Refer to
Figure 2-1b for reference.
6
Figure 2-1a
(2) 3/8"-16 U-Bolts
(4) 3/8"-16 Locknuts
PER BRACKET
Figure 2-1b
(1) 3/8"-16 U-Bolt
(2) 3/8"-16 Locknuts
PER SIDE OF TUBE
Outer Engine
Mount Bracket
Rear Frame
Outer Engine
Mount Bracket
Outer Engine
Mount Tube
Advertisement
Table of Contents
