Table of Contents
Advertisement
2-2 Outer Engine Mount Tube
Installation
Before installing the outer engine mount tube, first install
the lower mount assembly.
To mount the lower mount assembly P#(A0672) to the
rear of the mower, first remove the mower's (4) existing
nuts and bolts. Once the nuts and bolts are removed,
place the lower mount assembly onto the rear of the
mower, and secure using the (4) existing nuts and bolts
that were removed from the mower (Figure 2-2). After
the lower mount assembly is secure, mount the outer
engine mount tube P#(B1117) by using (2) 3/8"-16 u-
bolts P#(K1119) and (4) 3/8"-16 flange nuts P#(K1215).
Once the outer engine mount tube is secure, tighten all
nuts and bolts.
Figure 2-2
Outer Engine
Mount Tube
Lower Mount Assembly
3/8" U-Bolt
2-3 Engine Mount Arm Assembly
Installation
Slide the engine mount arm assembly P#(A0318)
(Figure 2-3) into the outer engine mount tube. Secure
the engine mount arm assembly using (1) detent pin
P#(J0248).
Figure 2-3
Detent Pin
2-4 Engine/Blower/Blade Assembly
Installation
Place the engine/blower/blade assembly onto the engine
mount arm assembly (Figure 2-4). Secure the
engine/blower/blade assembly to the engine mount arm
assembly by using (4) 5/16"-18 x 1-1/2" hex bolts
P#(K1157) and (4) 5/16"-18 flange nuts P#(K1178).
Figure 2-4
6
9
Engine Mount
Arm Assembly
(4) 5/16"-18 x 1-1/2" HHCS
(4) 5/16"-18 Flange Nuts
Advertisement
Table of Contents
