Table of Contents
Advertisement
2-15 Weight Kit Installation
NOTE: It is recommended that someone assist you in
the weight kit installation procedure.
Attach the Left Weight Bracket P#(B0962) and Right
Weight Bracket P#(B0963) to the front frame of the
mower. Place each weight bracket onto the frame tube
and secure using (1) 3/8"-16 x 2-1/4" x 1-3/4" U-Bolt
P#(K1436) and (2) 3/8"-16 Ny-Flange Lock nuts
P#(K2038). Leave the hardware finger tight so the
position of the weight brackets can be adjusted left or
right if necessary. Refer to Figure 2-15a.
Using two people, lift the weight bars P#(B2220) into
position. Secure the weight bars to the left and right
weight brackets using (2) 1/2"-13 x 4-1/4" u-bolts
P#(K0331) and (4) 1/2"-13 Ny-Flange locknuts
P#(K2012). NOTE: Before tightening all of the
hardware, make sure the weight bars are centered
between the weight brackets.
17
Advertisement
Table of Contents
