Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Peco Classic Series
Summary of Contents for Peco Classic Series
- Page 1 P P P ENGINE DRIVEN PECO PECO PECO PECO PECO GRASS COLLECTION SYSTEM DESIGNED FOR: Classic Series 2015-2017 MODEL #: 38621241 & 38621244 Classic 2750KW, 2760KW, 3160HP, 3160EFI 3572HP, 3572EFI & 3672BR OPERATOR’S MANUAL ASSEMBLY OPERATION MAINTENANCE MANUAL PART#: Q0505...
-
Page 2: Table Of Contents
GRASS COLLECTION SYSTEM TABLE OF CONTENTS SECTION PAGE SECTION PAGE 2-10 Length of Hose Adjustment - - - - - - - - - - - - - - 15 Safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Safety Alert Symbols - - - - - - - - - - - - - - - - - - - - - - 3 2-11 Upper Hose Installation- - - - - - - - - - - - - - - - - 15 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4... -
Page 3: Safety Alert Symbols
SAFETY WARNING! NEVER operate the mower unless the discharge guard and either the deflector assembly or the vacuum collector adapter are fastened securely in place. WARNING! Do not work around the mower deck boot or the blower area until you are certain that the mower blades and the blower impeller have stopped rotating. -
Page 4: Warranty
PECO elects, without charge if the defect appears within 90 days from the date of installation of such part or before the expiration of the original warranty period, whichever is later. -
Page 5: Introduction And Description
Section I - INTRODUCTION AND DESCRIPTION 1-1 Introduction 1-2 Description We are pleased to have you as a PECO customer. Your The grass collection system is designed for turf collection system has been designed to give you a low maintenance where there is a need to collect the grass maintenance, simple, and effective way to collect the clippings as the mower cuts the turf. -
Page 6: Installation For Use
2-1 Outer Engine Mount Tube Installation Attach (2) Outer Engine Mount Brackets P#(B0569) to the rear frame of the mower, in the position and orientation shown in Figure 2-1a and 2-1b, using (2) 3/8”-16 x 2-1/4" x 1-3/4" U-Bolts P#(K1436) and (4) 3/8”- 16 Ny-Flange Locknuts P#(K2038) PER BRACKET. -
Page 7: Engine Mount Arm Assembly Installation
2-3 Engine/Blower/Blade/Assembly 2-2 Engine Mount Arm Assembly Installation Installation Position the Engine/Blower/Blade Assembly P#(A639) Insert the Engine Mount Arm Assembly P#(A1916) into on top of the Engine Mount Arm Assembly as shown in the Outer Engine Mount Tube and secure using (1) Figure 2-2, and secure using (4) 5/16”-18 x 1-1/2”... -
Page 8: Blower Cone Installation
2-4 Blower Cone Installation Thread (1) 5/16”-18 Jam Nut P#(K0120) onto the end of each (2) 5/16”-18 x 2-1/2” HHCS P#(K0125). Now partially thread the bolts into each of the two tabs located on the Blower Housing. Place Blower Cone P#(E6009) so the two tabs line up with the bolts then tighten completely. -
Page 9: Box Handle Assembly Installation
Use Middle Set Of Mounting Holes Figure 2-5c (4) 1/2”-13 x 1-1/4” HHCS (4) 1/2”-13 Locknuts Use Front Set of Holes Main Frame Assembly 2-6 Box Handle Assembly Installation NOTE: Before continuing the lift handle installation, have someone assist you in turning the grass container upside down. - Page 10 Slide the lift handle through the slot on the Handle Mount Bracket. Insert the Lift Handle into the box frame as shown in Figure 2-6b, and secure using (1) 3/8”-16 Flange Nut P#(K1215) on the inside of the container as shown in Figure 2-6c.
-
Page 11: Aluminum Grass Container Installation
Attach the other end of the latch rod to the lift handle, as shown in Figure 2-6e. Attach on end of the spring P#(J0176) to the lift handle and the other end of the spring to the handle mount bracket as shown in Figure 2-6f. -
Page 12: Dump Mechanism Adjustment
To service your air filter, place your PECO Pro 12 Aluminum Grass Container in the dump position. Using a 12 mm wrench, remove the fastener securing the strap that holds the air filter housing in place. Lift the strap and unhook from the other side. -
Page 13: Aluminum Grass Container Exploded View
ALUMINUM GRASS CONTAINER ASSEMBLY EXPLODED VIEW... -
Page 14: Boot To Mower Deck Installation
Classic Deck Plate Mounting Locations 2-9 Boot To Mower Deck Installation Refer to Figure 2-9c for Classic deck plate mounting locations. NOTE: Remove all grass deflector and/or mulching hardware from the mower deck before proceeding. Figure 2-9c Classic 72” Classic 50” & 60” Mounting Holes Position the Boot Plate P#(B0775) onto the top of the Aluminum Boot P#(E0023) as shown in Figure 2-9a. -
Page 15: Length Of Hose Adjustment
2-10 Length Of Hose Adjustment 2-12 Lower Hose To Blower Cone Installation The hoses in steps 2-11 and 2-12 must be cut to fit your machine. Follow steps 2-11 and 2-12. do not cut the Slide a Spirofil Hose Clamp P#(J0080) over both ends of hoses until you have tried to fit them on your machine. -
Page 16: Impeller Blade Removal/Replacement
2-14 Impeller Blade Tips on removing impeller blade; Removal/Replacement 1 - Try carefully hitting the base of the impeller blade (#1), between each vein (#12), with a rubber mallet to loosen the taper-lock bushing hold. To gain impeller blade (#1) access, first remove the 2 - Spray break-free lubricant into the surrounding areas blower cone (#2) from the blower housing, located on of the taper-lock bushing (#9) and repeat Tip 1. -
Page 17: Weight Kit Installation
Place Left Weight Bracket P#(B0962) onto the frame 2-15 Weight Kit Installation and secure using (1) 3/8”-16 x 2-1/4” x 1-3/4” U-Bolt P#(K1436) and (2) 3/8”-16 Ny-Flange Locknuts P#(K2038). Next, place Right Weight Bracket NOTE: It is recommended that someone assist you in P#(B0383RT) onto the front tubing, as shown in Figure the weight kit installation procedure. -
Page 18: Throttle Kit Installation
2-16 Throttle Installation To fasten the throttle cable end to the engine, place To install the throttle kit assembly to the ROPS (roll over the throttle control lever into the “slow” position. protection system), place the 3/8” U-Bolt P#(K0136) onto Rotate the engine throttle lever to the “slow”... -
Page 21: Operating Instructions
3-3 Disengagement Of The Blower SECTION III OPERATING A. Turn the engine/blower/blade assembly off. INSTRUCTIONS WARNING: The blower will continue to spin. DO NOT TOUCH the blower until the blades have come to a 3-1 General Safety complete stop. Only qualified people familiar with this operator’s manual 3-4 Unloading The Collection System and the mower’s operator’s manual should operate this machine. -
Page 22: Parts And Service
5-1 Parts And Service Information 5. Check for wear or deterioration of the upper or lower PECO collection system owners should record the name hoses. If there are any portions of the hose that have and telephone number of their Service Center. Your... -
Page 23: Safety Decals
SAFETY DECALS To promote safe operation, Peco supplies safety decals on all products manufactured. Damage can occur to safety decals either through shipment, use or reconditioning. Contact your local Service Center for replacement decals. # R2008 # R2007 Part #: R1057... -
Page 24: Torque Specifications
D. Chopper... - Page 25 NOTES:...
- Page 26 P P P PECO PECO PECO PECO PECO 10 WALDEN DR. ARDEN, NORTH CAROLINA 28704 (800) 438-5823 OR (828) 684-1234 FAX: (828) 684-0858 EMAIL: peco@lawnvac.com WEBSITE: www.lawnvac.com...
Need help?
Do you have a question about the Classic Series and is the answer not in the manual?
Questions and answers