Table of Contents
Advertisement
Slide the lift handle through the slot on the Handle Mount Bracket. Insert the Lift Handle into the box frame as
shown in Figure 2-6b, and secure using (1) 3/8"-16 Flange Nut P#(K1215) on the inside of the container as
shown in Figure 2-6c.
Slide Lift Handle Through
Handle Mount Bracket And
Fasten To Box Frame
Fasten the ball joint P#(K1442) to the end of the Latch Rod P#(A0260). Tighten the Ball Joint to approximately
half way down the threads on the Latch Rod. Attach the ball joint to the Latch Hook as shown in Figure 2-6d,
using (1) 5/16"-24 Hex Nut P#(K1444) and (1) 5/16" Lock Washer P#(K0043).
10
Figure 2-6b
Figure 2-6d
Latch Hook
Ball Joint
Figure 2-6c
(1) 5/16"-24 Hex Nut
(1) 5/16" Lock Washer
Latch Rod
Use (1) 3/8"-16 Flange Nut
On The Inside Of The
Grass Container
Advertisement
Table of Contents
