Parts And Service; Parts And Service Information - Peco XCaliber 3160KW Operator's Manual

Engine driven grass collection system

Hide thumbs

Table Of Contents

Table of Contents

3. Make sure all shields are in place and in good

condition. Repair or replace any missing or damaged

shields.

4. Listen for abnormal sounds, which might indicate

loose parts, damaged bearings, or other damage.

Correct any deficiency before continuing operation.

5. Check for wear or deterioration of the upper or lower

hoses. If there are any portions of the hose that have

been torn or worn through, replace with genuine

PECO parts.

After Each Use:

1. Clean all debris from machine especially from the

container, underneath the belt shields, and safety

decals. Replace any missing or illegible decals.

2. Inspect the unit for worn or damaged components.

Repair or replace before the next use. Any

replacement component installed during repair shall

include the component's current safety decal specified

by the manufacturers to be affixed to the component.

DOCUMENT THE FOLLOWING INFORMATION FOR FUTURE REFERENCE

Unit Model Number:_______________________________________________

Unit Engine Size:__________________________________________________

Unit Serial Number:________________________________________________

Date of purchase:________/________/_________

Dealer/Distributor Name:__________________________________________

Address: _________________________________ State:_______ Zip:_______

Phone Number: ____________________________________________________

(800) 438-5823 OR (828) 684-1234 FAX: (828) 684-0858

10 WALDEN DR

ARDEN, NORTH CAROLINA 28704

EMAIL: peco@lawnvac.com

WEBSITE: www.lawnvac.com

SECTION V