Tools Screen 2 - Supplies, Configuration, Tests, Power Saver - Xerox Document Centre 255 LP Reference Manual

Tools Screen 2 - Supplies, Configuration, Tests, Power Saver

Configuration and Setup
l
50/60 Hz
l
Active Telephone Line
l
Xerox Customer Center Number
l
Disk Finisher Setup
Refer to page 6-35
Machine Tests
Refer to page 6-37
Power Saver Administration
Refer to page 6-33
Software Reset
l
Reset System Software or Network
Controller
Refer to page 6-36
Xerox Document Centre Reference Guide
This screen identifies the color of the Document
Cover pad on the inside of the Document Cover,
whether the machine is set for 50 or 60 Hz, and is
where the machine telephone number is
programmed to enable remote diagnostics and
options for the Disk Finisher.
Allows access to machine diagnostics to assist
you in identifying machine problems.
Where the time interval is set to switch from
Standby to Sleep mode.
This is the button to access where you reset some
machine systems without powering off the
machine.
System Tools
Page 6 - 7