Datcon DT9000 N Operating Instructions Manual page 23

DT9000 N
During setting up





Minimum-maximum
values on the display
(▲ button)





Limit values on the
display




20180614-V0
The instrument is making calculations, please wait
(Busy)
The requested operation has been completed (Ready)
The saving of the settings is being done (Save)
No, I don't want this menu (No)
Yes, the menu can be started (Yes)
Minimum value (MINimum)
Maximum value (MAXimum)
Firmware version (FiRMwareE)
Low numeric value not possible to display
High numeric value not possible to display
Both limit outputs are switched off
The limit output No.1 is switched on (Limit 1)
The limit output No.2 is switched on (Limit 2)
Both limit outputs are switched on
23