Datcon DT9000 N Operating Instructions Manual page 3

DT9000 N
7.
8. Fault
9.
10.
20180614-V0
Setting-up.....................................................................27
7.1. Typing the code (password) in................................................27
7.2. The menu.................................................................................29
7.3. Display modes of limit output status (01. menu item).............30
7.4. Setting up the limit outputs (02. and 03. menu items)............32
7.5. Limit output alarm mode..........................................................38
7.6. Decimal point position (04. menu item)...................................40
7.7. The physical value assigned to 4 mA (05. menu item)...........41
7.8. The physical value assigned to 20 mA (06. menu item).........43
7.9. The number of averaged measurements (07. menu item).....45
7.10. Display refresh time (08. menu item)....................................47
7.11. Tests (09. menu item)............................................................49
7.12. Changing the user code (10. menu item)..............................51
7.13. Changing the supervisor code (11. menu item)....................53
7.14. Display operating modes (12. menu item)............................55
7.15. Disable displaying the leader zeros (13. menu item)............57
7.16. Clear minimum and maximum values (14. menu item)........59
7.17. Resetting the default settings (15. menu item).....................60
rectification.........................................................61
8.1. Fault finding.............................................................................61
8.2. Repairing..................................................................................61
Dismounting................................................................61
9.1. Dismounting procedure...........................................................61
9.2. Disposal...................................................................................61
Appendix....................................................................62
10.1. Technical specifications.........................................................62
10.2. Application example..............................................................64
10.3. Error messages.....................................................................65
10.4. Messages of critical errors.....................................................66
10.5. Description of the menu items...............................................67
10.6. Messages and error messages during setting up.................70
10.7. Setting up the instrument (Example).....................................71
10.8. The limit outputs (training material).......................................73
3