Table of Contents
Advertisement
DT9000 N
Access is possible
by supervisor code only
Access is possible
by supervisor code only
Access is possible
by supervisor code only
Access is possible
by supervisor code only
20180614-V0
Changing the User Code (User Code)
The new User Code must be typed in twice, in order to
avoid any typing errors. The mnemonic
warns you to type the code for the second time, after you
have typed it once. If the two codes are not identical with
each other, the mnemonic
the display, and the instrument exits the menu item.
Make sure not to forget the User Code, otherwise a new
one can be defined only if you enter the menu by a
Supervisor Code [Default factory setting: 000]
Changing the Supervisor Code (Supervisor Code)
The new Supervisor Code must be typed in twice, in order
to avoid any typing errors. The mnemonic
Type) warns you to type the code for the second time, after
you have typed it once. If the two codes are not identical
with each other, the mnemonic
on the display, and the instrument exits the menu item.
Make sure not to forget the Supervisor Code, otherwise a
new one can be defined in the service only. [Default factory
setting: 100]
Display mode (LCD)
•
: four-and-a-half-digit mode (-19999 - 19999).
•
: three-and-a-half-digit mode (-1999 - 1999).
[Default factory setting: four-and-a-half-digit]
Disable displaying leader zeros (Leader Null)
•
: the leader zeros are displayed
•
(Space): the leader zeros are not displayed, only
one standing before the integer [Default factory setting:
leader zeros are displayed]
Restoring the default settings (Reset 1)
When you select
the default factory setting, and the instrument restarts.
It is not possible to withdraw this command subsequently!
(Bad Code) appears on
(Bad Code) appears
, all the parameters will be reset to
(Re-Type)
(Re-
69
Advertisement
Table of Contents
