Quick Guide To Fire System Functions - Honeywell VISTA-128FBPT User Manual

ACTION
Displaying Event
Silencing Fire Alarms
Resetting Alarms
Silencing Troubles and
Supervisory Conditions
Resetting Troubles and
Supervisory Conditions
National Security Systems (800)457-1999

Quick Guide to Fire System Functions

PROCEDURE
The system is programmed to lock the keypad display with the first event that
occurred in priority order.
1. Fire – highest priority
2. Life Safety
3. Troubles and Supervisory
4. System Events (i.e. low battery) – lowest priority
To display the next event, press the [
To revert to the first event displayed, press the # key.
Enter User Code +1 (OFF). This will silence the keypad, but may or may not
silence the fire bells, depending on system programming. A second User Code
+ 1 (OFF) sequence may be required. The Silenced LED on the 6160CR-2
keypad will light.
To reset alarms, enter User Code + 1 (OFF) a second time. This will clear
alarms from memory.
To Silence Troubles or Supervisory Conditions, enter User Code +1 (OFF). The
corresponding LED on the 6160CR-2 keypad will light.
Troubles and supervisory conditions automatically reset when the condition is
cleared if programmed by your installer. Otherwise reset the condition by
entering Code + 1 (OFF).
http://nationalsecuritysystems.com
∗
] key. Repeat as necessary.
– 65 –