Using #70 Relay Menu Mode; General Information - Honeywell VISTA-128FBPT User Manual

Commercial fire and burglary partitioned security systems with scheduling

Hide thumbs Also See for VISTA-128FBPT:

Table of Contents

Your system may be set up so that certain lights or other devices can be

turned on or off by using the #70 command from a keypad. Ask your installer

if this has been done in your system.

To activate relays from a keypad, enter 4-digit security code + [#] +70.

Follow the keypad prompts described below.

NOTE: Your installer may have restricted the use of this function. Please

check with your installer.

ENTER DEVICE NO.

00=QUIT

DEVICE IS OFF

HIT 0=OFF , 1=ON

DEVICE IS OFF

HIT THE "/" KEY

National Security Systems (800)457-1999

Using #70 Relay Menu Mode

Enter the 2-digit number of the device to be

activated.

Note that if an invalid number is entered, the

system will simply ask you to reenter the number.

Press 0 or 1 to turn the device off or on respectively.

"nn" represents the 2-digit device number and voice

descriptor is the relay voice descriptor programmed

by the installer.

From a keypad, press / to continue. The ENTER

DEVICE NO. prompt will appear.

http://nationalsecuritysystems.com

– 45 –

Table of Contents

Vista-250fbpt