Honeywell VISTA-128FBPT User Manual page 53

Using #77 Instant Activation Mode (cont'd)
Bypass Commands
Activation times 1 (Beginning), 2 (End), and 3 (During) are the only valid
choices for bypass commands. If 3 (During) is selected for auto-bypassing,
the system bypasses the zone(s) specified on a particular zone list at the
beginning of the window and unbypasses them at the end of the window. If it
is selected for auto unbypassing, the system removes the bypass at the
beginning of the window and restores the bypass at the end of the window.
Action Code
30 Auto bypass - Zone list
31 Auto unbypass - Zone list
Open/Close Windows
Activation time 3 (During) is the only valid choice for these commands.
Action Code
40 Enable Opening Window by partition
41 Enable Closing Window by partition
42 Enable Access Window for access group
Access Control Commands
Action Code
55 Access Point Grant
56 Access Point Grant with Override
57 Access Point Protect
58 Access Point Bypass
59 Access Point Lock
60 Access Point Exit
61 Access Point Group Grant
62 Access Point Group Grant with Override
63 Access Point Group Protect
64 Access Point Group Bypass
66 Access Point Group Exit
67 Access Point Partition Grant
68 Access Point Partition Grant with Override
69 Access Point Protect by Partition
70 Access Point Bypass by Partition
71 Access Point Lock by Partition
72 Access Point Exit by Partition
73 Access Point Trigger On
74 Access Point Trigger Off
National Security Systems (800)457-1999
http://nationalsecuritysystems.com
Action Specifier
Zone list #
Zone list #
Action Specifier
Partition(s)
Partition(s)
Access Group
Action Specifier
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Group #
Group #
Group #
Group #
Group #
Partition #
Partition #
Partition #
Partition #
Partition #
Partition #
Trigger #
Trigger #
– 53 –