Appendices; Mt Standard Continuous Output - OHAUS Courier 7000 Instruction Manual

Hide thumbs Also See for Courier 7000:
Table of Contents

Advertisement

EN-52

11. APPENDICES

11.1 MT Standard Continuous Output

A checksum character can be enabled or disabled with continuous output. The data consists of 17 or 18 bytes
as shown in the standard continuous output.
Non-significant weight data and tare data digits are transmitted as spaces. The continuous output mode
provides compatibility with OHAUS products that require real-time weight data. the standard continuous output.
Table 11-1 shows the format for the standard continuous output.
Character 1
Data
STX
Continuous Output Format Notes:
1. ASCII Start of Text character (02 hex), always transmitted.
2. Status bytes A, B and C. Refer to Table 11-2, Table 11-3, and Table 11-4 for details of the structure.
3. Displayed weight. Either gross or net weight. Six digits, no decimal point or sign. Insignificant leading
zeroes are replaced with spaces.
4. Tare weight. Six digits of tare weight data. No decimal point in field.
5. ASCII Carriage Return <CR> character (0D hex).
6. Checksum, transmitted only if enabled in setup. Checksum is used to detect errors in the transmission
of data. Checksum is defined as the 2's complement of the seven low order bits of the binary sum of all
characters preceding the checksum character, including the <STX> and <CR> characters.
Table 11-2, Table 11-3, and Table 11-4 detail the status bytes for standard continuous output.
Bits 2, 1, and 0
2
0
0
0
0
1
1
1
1
Bits 4 and 3
4
0
1
1
Bit 5
Bit 6
Status Bits
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Table 11-1: Standard Continuous Output Format
Status
2
Indicated Weight
2
3
4
5
SB-A SB-B SB-C MSD - - - - LSD MSD -
1
Table 11-2: Status Byte A Bit Definitions
1
0
0
1
1
0
0
1
1
3
1
0
1
Table 11-3: Status Byte B Bit Definitions
Out of Range = 1 (Over Capacity or Under Zero)
lb = 0, kg = 1 (see also Status Byte C, bits 0, 1, 2)
Zero Not Captured after power-up = 1
3
Tare Weight
6 7 8 9 10
11
0
Decimal Point Location
0
XXXXX00
1
XXXXX0
0
XXXXXX
1
XXXXX.X
0
XXXX.XX
1
XXX.XXX
0
XX.XXXX
1
X.XXXXX
Build Code
X1
X2
X5
Always = 1
Always = 0
Function
Gross = 0, Net = 1
Sign, Positive = 0, Negative = 1
Motion = 1, Stable = 0
Always = 1
4
12 13 14 15 16
17
-
-
-
LSD CR
5
Courier 7000
18
CHK
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-c71m15rI-c71m75rI-c71m50lI-c71m125lI-c71m125x

Table of Contents