Table of Contents
Advertisement
Courier 7000
Shipping Software
UPS WorldShip
1.
Click the System Preferences and select the Hardware.
2.
Select the corresponding COM port from the Scale port drop-down list.
NOTE: You can check the exact COM port from the Windows Device Manager without leaving the
WorldShip software.
3.
Select the OHAUS Courier 7000 protocol from the Scale Type drop-down list.
4.
Click the Test Scale button. A window for Test Active Scale will appear.
NOTE: As the test goes from start to end, you can see the information changes from Weight
Processing to Weight Processed.
Click OK button to close the Test Active Scale window once weight is successfully processed.
5.
NOTE: The weight on the scale and the weight in UPS WorldShip should be the same. In some
cases, UPS WorldShip may round extra digits from the display weight. If the displayed weight and
UPS WorldShip weights are very different, check that the scale and UPS WorldShip are using the
same weighing unit (kg, lb or oz).
6.
Click Apply button to save the selections.
7.
Click OK button to close the System Preferences Editor window.
8.
Select the Company or Name from the drop-down list. Courier 7000 is ready for UPS weight
processing.
NOTE: UPS WorldShip software only processes the numeric weight value from the scale -- it does not
autosense the weighing unit (kg, lb or oz) nor does it make a conversion from one weighing unit to
another. Make sure the correct weighing unit is selected on the scale before weighing.
NOTE: Before you connect the scale to the PC, please install the OHAUS UPS WorldShip Update Tool.
Scale to PC connection
USB CDC
RS232
1
OHAUS Courier 7000
8
Protocol Settings
3835
3835
4
2
3
EN-31
Terminal Settings
/
9600, 8, N, 1
7
6
5
Advertisement
Table of Contents
