Table of Contents
Advertisement
Courier 7000
4.
Press the Yes button, and r.E.S.E.t appears on the display.
5.
Short press the No button once, and ASSIGN appears on the display.
6.
Short press the Yes button to enter the sub menu.
7.
Short press the No button several times until the wanted protocol (NCI/8213/3835/SCP01) appears on
the display.
8.
Short press the Yes button to confirm.
For example: UPS WorldShip / FedEx Ship Manager uses protocol 3835.
6.2.2 RS232 Port
The scale can be also set up to communicate via the RS232 port:
Steps
Long press the Menu button until mM.E.N.U appears on the display.
1.
Release the Menu button, and C.A.L appears on the display.
2.
Short press the No button several times until P.r.i.n.t appears on the display.
3.
Press the Yes button and rESEt appears on the display.
4.
5.
Short press the No button once, and ASSIGN appears on the display.
6.
Short press the Yes button to enter the sub menu.
Short press the No button several times until the wanted protocol appears on the display.
7.
NOTE: For example: UPS WorldShip / FEDEx -3835.
8.
Short press the Yes button to confirm.
Courier 7000 RS232 Connection
You can connect the optional RS232 cable to the RS232 connector on the Courier 7000 terminal. Refer to
figure 6-1, you can find the definition of each pin.
RS232 Connector
Figure 6-1 Courier 7000 RS232 Connector
Pin
Connection
1
N/C
2
TXD
3
RXD
4
N/C
5
GND
Pin
Connection
6
N/C
7
N/C
8
N/C
9
N/C
EN-35
Advertisement
Table of Contents
