Table of Contents
Advertisement
Courier 7000
2.
Some modes/units may not be available in all models.
When LEGAL FOR TRADE is turned ON (the security switch S1 is in the locked position), the menu
settings will be affected as below:
•
Calibration function is disabled.
Zero Range setting is locked at 2%.
•
Stable Range setting is locked at 1d.
•
Auto-Zero Tracking setting is locked at 0.5d.
•
Filter and Units are locked at their current settings.
•
•
Stable Only is locked at On.
:
Lb
oz unit is only for postal use if it is available.
•
•
Power saving mode is disabled.
NOTE: Refer to 5.1 Settings for the position of the security switch S1.
4.1.2 Button Navigation
For menu items which need to set numbers such as the scale capacity, the current
number is displayed with all digits flashing. To revise:
1.
Press the No button to begin editing.
2.
The first digit is displayed flashing.
3.
Press the No button to increase the digit or press the
Yes button to accept the digit and move to the next
one.
NOTE: press the Back button can decrease the digit.
4.
Repeat this process for all digits.
5.
Press the Yes button when the last digit has been set.
6.
The new setting is displayed with all digits flashing.
Press the Yes button to accept the setting or press the
No button to resume editing.
7.
To end the current menu selection, press the Yes
button to advance to the next menu, or press the No
button to return to the top of the current menu.
4.2
Calibration Menu
The scale can perform calibrations if you select the calibration menu
Changing the Calibration Unit
If you want to change the calibration unit, you can do the following steps.
1.
Long press the Menu button until
2.
Release the Menu button, and
Short press the No button, and
3.
4.
Press the Yes button to enter the sub menu.
5.
Short press the No button, and
6.
Short press the Yes button, and kg / Ib blinks on the display. If you want to change the unit, short press
the No button.
7.
Short press the Yes button to confirm.
mM.E.N.U
appears on the display.
C.A.L
appears on the display.
s.Et.u.p
appears on the display.
C.Unit
appears on the display.
C.A.L.
EN-17
Advertisement
Table of Contents
