Courier 3000 EN-1 TABLE OF CONTENTS INTRODUCTION ............................2 1.1. Safety Precautions ...........................2 1.2. Intended Use ............................2 1.3. Overview of Parts and Controls .......................3 1.4. Control Functions .............................3 INSTALLATION ............................5 Packing List ..............................5 Unpacking the Scale ..........................5 Setup ................................5 2.3.1 Power Supply Connection .........................5 2.3.2...
Any other type of use and operation beyond the limits of technical specifications, without written consent from OHAUS, is considered as not intended. This instrument complies with current industry standards and the recognized safety regulations;...
Description Front housing Load cell cable connector Control panel Power port 1.4. Control Functions Figure 1-2 Courier 3000 Control Panel Button On/Zero Units/Hold If the scale is off, short press to turn on the scale. Enter/exit the hold mode. When the weight on the platform is less than or equal to 2% of the Capacity value, a short press will zero the instrument display.
Page 8
EN-4 Courier 3000 Figure 1-3 Display Item Description Item Description Net weight symbol Battery symbol Negative symbol Center of Zero symbol Kilogram symbol Stable weight symbol Pound Display Hold symbol...
Unpacking the Scale Steps Take out documents, AC adapter and put them to the side. Remove the foam blocks. Foam Take the Courier 3000 scale out of the box and put it on a stable block surface. Setup 2.3.1 Power Supply Connection AC Adapter Power Connect the AC Adapter to the terminal.
EN-6 Courier 3000 3. OPERATION Turning On/Off the Scale To turn on the scale, you can short press the On/Zero button. The scale displays the software version and enters the weighing mode. To turn the scale off, you can long press the Off button until is displayed.
Courier 3000 EN-7 Application Modes 3.5.1 Weighing This mode is the default factory setting, and it is used to determine the weight of the loads in the selected unit of measure. Starting to Weigh Put a weight on the scale. Once the value is stable, you can see "*" on the display.
4. MAINTENANCE Cleaning For Courier 3000, the housing may be cleaned with a cloth dampened with a mild detergent if necessary. CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING. WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Courier 3000 EN-9 5. TECHNICAL DATA Specifications Equipment Ratings: Indoor use only Altitude: 2,000m/6,562ft Operating temperature: -10°C to 40°C (14°F to 104°F) Humidity: Maximum relative humidity 80% for temperatures up to 31 °C (87.8°F) decreasing linearly to 50% relative humidity at 40°C (104°F).
Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, UK Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The UK Declaration of Conformity is available online at www.ohaus.com/uk-declarations. This product complies with the EU Directive 2012/19/EU (WEEE). Please dispose of this product in accordance with local regulations at the collecting point specified for electrical and electronic equipment.
OHAUS products are warranted against defects in materials and workmanship from the date of delivery through the duration of the warranty period. During the warranty period OHAUS will repair, or, at its option, replace any component(s) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to OHAUS.