Lock Button Configuration - OHAUS Courier 7000 Instruction Manual

Courier 7000
Move to the next menu or return to the top of the current menu.
Selecting the Print Content
You may connect the terminal to a PC via the standard RS232 or optional communication interface and run
the OHAUS ScaleMate software on the PC.
If the ScaleMate software runs well, there is a window for you to select the print content (Result, Gross,
Net, Tare, Header, Footer, Mode, Unit and Info). After you select the wanted content, please click the
Write button to transmit the data to the scale. (For example: If you select the Net and Gross, then click the
Write button in the ScaleMate software. The Result and Gross are enabled, and other options are
disabled in the scale.)
Therefore, you can see the net weight and the gross weight from the output.
NOTE: You can contact an authorized OHAUS dealer to install the ScaleMate software and learn more
about the software's other functions.
4.8

Lock Button Configuration

L.o.c.k
This menu is used to lock access to certain buttons. When you select ON for one selection, the
associated button press will be ignored.
If you select Lock All Keys, you will lose function of all buttons.
If the Menu button has been locked, long press the Menu button for 15 seconds until you see
the Yes button to confirm.
Item
Lock All Keys
Lock Off Key
Lock Zero Key
Lock Print Key
Lock Unit Key
Lock Mode Key
Lock Menu Key
Lock Tare key
Reset
Available Settings (Bold is the default settings)
OFF, ON
[L.ALL]
OFF, ON
[L.OFF]
OFF, ON
[L.ZErO]
OFF, ON
[L.Print]
OFF, ON
[L.Unit]
OFF, ON
[L.mModE]
OFF, ON
[L.mMeNU]
OFF, ON
[L.tarE]
NO, YES
EN-27
UN.LOCK
. Press