Table of Contents
Advertisement
EN-12
3.5.2 Totalization
This application is used to accumulate the multiple weights manually or automatically. Statistical data (the
number of samples, the total weight, the average weight, the minimum weight, the maximum weight and the
difference in weight) is stored in memory for review and printing.
Application Settings
There are three totalization options:
OFF
Off (
):
mMAN
): Enable the totalization function manually with Function button.
Manual (
AutO
Automatic (
):
NOTE: The option of Manual is the default setting.
Setting the Totalization Option:
1.
Long press the Menu button until the
2.
Release the Menu button, the
3.
Short press the No button several times until
If you do it successfully, you can see the
4.
Short press the No button several times until
enter the sub menu.
5.
Short press the No button several times to select the wanted totalization option. If the wanted option
appears on the display, you can press Yes button to confirm.
6.
Press the Exit button to exit.
Entering the Mode
1.
Long press the Mode button until
Release the Mode button, and the
2.
If you need to remove the stored totalization result of the last time, you can press the Yes button, and
•
then the scale performs the totalization function.
If you need to reuse the stored totalization result of the last time, you can press the No button to
•
continue the totalization of the last time.
NOTE: If there is a container on the scale, the display shows
you press the Tare button to tare.
Totalization Method
Manual: The operator initiates the totalization with the Function button.
Automatic: The scale performs the totalization function automatically.
If the scale performs the totalization well, you can see the ∑ is flashing. It will keep flashing until the weight is
removed and the platform is stable.
NOTE:
•
Before you weigh the next load, you must remove the previous load from the scale.
The scale only stores the stable value of the display.
•
•
When Legal for Trade is turned ON, for NTEP models, gross and net weight cannot be added to the same
total. If the first weight is recorded in gross, the next one should be recorded in the same way. It is the
same for the net weight.
Checking the Totalization Result
When the scale is empty, you can press the Function button to check the result.
The result includes the number of samples, the total weight, the average weight, the minimum weight, the
maximum weight and the difference in weight (the maximum weight minus the minimum weight). The values
are displayed for 1 second each.
Totalization Rules
You will fail to do the totalization operation under the following conditions.
1.
The current weight value is unstable.
2.
The net weight of the load is smaller than 5d.
3.
The overall totalized weight is larger than 999999.（The unit depends on your setting.）
4.
The total number of totalizations exceeds 9999 times.
Disable the totalization function.
The scale performs the totalization function automatically.
mM.E.N.U
C.A.L
appears on the display.
reset
tOtAL
appears on the display.
CLr.ACC
appears on the display.
mM.O.d.E
appears on the display, then press the Yes button.
on the display.
t0tal
appears on the display, then press Yes button to
appears on the display.
CLr.PAN
Courier 7000
until the container is removed or
Advertisement
Table of Contents
