Table of Contents
Advertisement
JFC-180BB
3. Press [ ] of
The setup box of [XXX Output] will be
displayed.
4. To enable the output, select [ON] and to
disable, select [OFF] with [▲] and [▼]
keys.
5. Press
to close the menu.
5.16.4 Display of input sentence on
NMEA Monitor
Source - NMEA Monitor
This is the function to confirm the data input
from NMEA1 (J8) and NMEA2 (J3).
1. Press
.
2. Select [Source] - [NMEA Monitor].
3. Press [ ] of
The setup box of [NMEA Monitor] will be
displayed.
4. For seeing the input data of NMEA1 (J8),
select [NMEA1] and for seeing the input
data from NMEA2 (J3), select [NMEA2]
with [▲] and [▼] keys.
5. Press [ ].
The monitor on the specified NMEA side
will be displayed. The data input will be
displayed white or yellow for the strings of
characters.
6. For temporary stopping, press [ ].
When stopped temporarily, the monitor
image will stop and the data displayed can
be confirmed.
7. For restarting, press [►].
8. Press
to close the menu.
7ZPNA4619A
.
.
Chapter 5 System Setting
5.16.5 Interval selection of NMEA0183
output
Source – NMEA Output Interval
The interval of the NMEA0183 output can be
selected.
1. Press
.
2. Select [Source] - [NMEA Output Interval].
3. Press [►] of
The setup box of [NMEA Output Interval]
will be displayed.
4. Select output interval with [▲] and [▼]
keys.
5. Press
to close the menu.
5.16.6 Olex Connection
Source – Olex Connection
To select connection with Olex Plotter.
1. Press
.
2. Select [Source] - [Olex Connection].
3. Press [►] of
The setup box of [Olex Connection] will
be displayed.
4. Select ON/OFF with [▲] and [▼] keys.
Caution: When Olex Connection is
[ON], baud rates of J3 and J8 are
set to 38400 bps, and output
sentence of J3 and J4 are set to
Olex format.
.
.
5-15
1
2
3
4
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Advertisement
Table of Contents
