Table of Contents
Advertisement
Chapter 5 System Setting
[In case of update of the program with the
SD Card or the USB Memory]
At completion of downloading, "Normally
updated. Turn ON the power again." will
be displayed.
9. Press
for about 5 seconds to switch
off the power.
Caution: When program updating
failed on the way, switch off the
power once and switch on again.
It will start up in the wait status of
downloading. Try again the
procedures from step 6 again.
5.23 Storage of settings in Flash memory
device
Maintain – Save Setting Value
The system setting value can be stored in
the SD card or the USB memory.
Please connect the SD card or the USB
memory in the slot on the left side of the
operation unit.
Caution: Please connect or
disconnect the SD card and the
USB memory after turning off
the power supply.
1. Press
.
2. Select [Maintain] - [Save Setting Value].
3. Press [ ] of
The [Save Setting Value] selection list box
will be displayed.
4. Using [▲] and [▼] keys, select [SD Card]
or [USB Memory] to be stored.
5-22
.
5. Press [ ] of
The setup box of [Save Setting Value] will
be displayed.
6. Using [▲] and [▼] keys, select [Yes] to
store, and select [No] for not to store.
7. Press
.
When [Yes] is selected, a message "It is
processing" will be displayed. When
storage is completed normally, "The
setting value data saved." will be
displayed. And, after a while display
returns to the [Save Setting Value]
selection list menu.
When [No] is selected, returns to the
[Save Setting Value] selection list menu.
8. Press
to close the menu.
5.24 Recall settings by Flash memory
device
Maintain – Apply Setting Value
The system setting value can be recalled
from the SD card or the USB memory.
Please connect the SD card or the USB
memory in the slot on the left side of the
operation unit.
Caution: Please connect or
disconnect the SD card and the
USB memory after turning off
the power supply.
1. Press
.
2. Select [Maintain] - [Apply Setting Value].
3. Press [ ] of
The [Apply Setting Value] selection list
box will be displayed.
JFC-180BB
.
.
7ZPNA4619A
Advertisement
Table of Contents
