Table of Contents
Advertisement
JFC-180BB
The setup box of [Fish Image] will be
displayed.
4. Pressing [▲] and [▼] keys, set Fish
Image.
5. Press
to close the menu.
2.3 Use Water Temp Alarm
This is to deliver alarm sound and display
when water temperature falls in the set
range or it falls outside of the set range.
This is a convenient function to stay within a
specific water temperature range.
The contents to use this Water Temp
Alarm are as follows:
•
Start/Stop the Water Temp Alarm
•
Set the Upper Temp Alarm
•
Set the Lower Temp Alarm
2.3.1 Start/Stop Water Temp Alarm
Alarm2 - Water Temp Alarm
This is to set "Water Temp Alarm" to be
activated in the preset range, out of the
preset range or to deactivate..
1. Press
.
2. Select [Alarm2] - [Water Temp Alarm].
3. Press [ ] of
The setup box of [Water Temp Alarm] will
be displayed.
7ZPNA4619A
.
4. Press [▲] and [▼] keys, to select [ON] to
activate the alarm and [OFF] to
deactivate.
At [ON-Inside range], alarm is delivered
when entering the preset range.
At [ON-Out of range], alarm is delivered
when going outside the preset range.
5. To set the Water Temp Alarm related
items subsequently:
(1) Go to item 2 of 2.3.2, when [Upper
Temp Alarm] is set.
(2) Go to item 2 of 2.3.3, when [Lower
Temp Alarm] is set.
6. Press
to close the menu.
Caution: Press any key to stop any
alarm sound and alarm display.
Caution: To activate the alarm
sound and the alarm display
again after once stopped, it is
necessary for the boat to go
outside of the alarm conditions.
Caution: When CCD camera
image is displayed, the alarm
display will be only by icon
display. (See "2.7 Confirmation
of alarm conditions", p 2-9.)
2.3.2 Setup of Upper Temp Alarm
Alarm2 - Upper Temp Alarm
This is to set the upper limit of alarm range
for Water temperature.
1. Press
.
2. Select [Alarm2] - [Upper Temp Alarm].
3. Press [ ] of
Chapter 2 Alarm
.
2-5
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Advertisement
Table of Contents
