Table of Contents
Advertisement
JFC-180BB
Chapter 3 NAV Operation
3.1 Starting waypoint NAV
NAV - NAV Start
By selecting a waypoint from the waypoint
list, waypoint NAV can be started.
To start waypoint NAV, registration of
waypoints are necessary. (See the
Instruction Manual [Basic], "4.4 [To use
event key])
Caution: To use [Waypoint NAV], it
is necessary to connect
navigation equipment such as
GPS.
1. Press
.
2. Select [NAV] - [NAV Start].
3. Press [ ] of
The [NAV Start] list box will be displayed.
*1
*1
*2
Caution: The selected list No. will
turn yellow.
4. Using [▲] and [▼] keys, select a No. in
the list to start waypoint NAV.
5. Press
.
1
*
WPT: The position (waypoint) that have been saved (Abbreviation of Waypoint)
2
*
PIC : Showing that a position has been saved from images stored (Abbreviation of Picture)
7ZPNA4619A
.
Chapter 3 NAV Operation
The setup box of [NAV Start] will be
displayed.
6. Pressing [▲] and [▼] keys, select [Yes] to
start and [No] not to start.
7. Press
.
When [Yes] is selected, the waypoint NAV
will start taking the specified Lat/Lon as
the waypoint. In addition, a plotter of NAV
screen will be displayed. When the NAV
screen is displayed and the plotter is not
yet displayed, the display will
automatically switch over to the plotter.
At the time when the waypoint NAV has
started, the menu is closed. There is no
need to proceed to the step 8.
When [No] is selected, the screen will
return to the [NAV Start] list.
8. Press
to close the menu.
Caution: The starting operation of
the waypoint NAV is once again
performed during operation of
the waypoint navigation, new
navigation will start to the new
waypoint selected.
3.2 Cancellation of waypoint NAV
NAV - NAV Cancel
The waypoint NAV already in progress can
be cancelled on the way.
1. Press
.
2. Select [NAV] - [NAV Cancel].
3. Press [ ] of
.
3-1
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Advertisement
Table of Contents
