Chapter 5 System Setting
5.14.8 Setup of Bottom Limit LF
TD Setting - Bottom Limit LF
To set Bottom Limit of low frequency.
1. Press
.
2. Select [TD Setting] - [Bottom Limit LF].
3. Press [ ] of
The setup box of [Bottom Limit LF] will be
displayed.
4. Press [▲] and [▼] to set a depth.
5. Press
to close the menu.
5.15 Setup of Basics
This is to set environmental setup such as
display language, present time, GPS used.
5.15.1 Selection of Language
Basics -
Language
Displayed language can be changed.
Caution: [Language] will be
displayed in red characters.
1. Press
.
2. Select [Basics] - [Language].
3. Press [ ] of
The setup box of [Language] will be
displayed.
5-12
.
.
4. Pressing [▲] and [▼], select a language
to be used.
5. Press
to close the menu.
5.15.2 Changing of Range & Speed Unit
Basics - Range & Speed Unit
The units in display can be changed to [NM,
kn], [Km, km/h] or [sm, mph].
1. Press
.
2. Select [Basics] - [Range & Speed Unit].
3. Press [ ] of
The setup box of [Range & Speed Unit]
will be displayed.
4. Pressing [▲] and [▼] keys, set units for
range and speed.
5. Press
to close the menu.
Caution: With this change of units
for range and speed, the set
values in all related items will be
converted to the values in the
specified units.
5.15.3 Changing of Depth Unit
Basics - Depth Unit
The unit for depth can be changed to m, fm,
I.fm, ft or J.fm.
1. Press
.
2. Select [Basics] - [Depth Unit].
3. Press [ ] of
The setup box of [Depth Unit] will be
displayed.
4. Pressing [▲] and [▼] keys, select a unit
for depth.
5. Press
to close the menu.
Caution: With this change of unit
for depth, the set values in all
related items will be converted to
the values in the specified unit.
JFC-180BB
.
.
7ZPNA4619A