Table of Contents
Advertisement
3. Display mode
3.1 Standard mode
Standard mode displays real time sounding echoes
[Sample screen at single frequency]
1
2
3
4
Echo drawing area
5
6
No.
Function
1
Display mode
2
Display time
3
Date and time
4
Latitude / Longitude
5
Frequency and
equipment position
Draft value
Keel value
Gain value
6
Depth value
7
Depth display setting
8
Range
9
Minutes mark
10
Depth cursor
11
Oscillation line
Note:
・ The display position at 2 frequencies changes depending on the transducer settings of CH1
and CH2 (Which CH is primary or secondary depends on the specifications of each ship).
・ FWD sounding data is displayed on the right side.
・ LAT/LON display needs to connect position data device.
7
9
8
10
11
Description
The current display mode and CH number are displayed.
The scroll time of the echo drawing area is displayed.
Date and time information from GPS are displayed. When not connected, the internal clock will be displayed.
Latitude / Longitude from GPS is displayed.
The frequency and equipment position of the transducer are displayed.
The entered draft value is displayed.
The entered keel value is displayed.
The current gain value is displayed. "Auto" is displayed when auto gain is selected.
The current water depth value is displayed digitally.
The currently selected depth display setting is displayed.
The current display range is displayed. "Auto" is displayed when auto range is selected.
Displayed at 1-minute intervals in echo drawing area. The length of the mark is 1 minute.
Displays the depth cursor and its water depth value.
The transmission line from the transducer is drawn horizontally at the top of the echo drawing area.
[Sample screen at dual frequency]
3
Echo drawing area
5
6
3-1
7
1
9
8
2
10
11
4
Echo drawing area
3. Display
5
6
Advertisement
Table of Contents
