Table of Contents
Advertisement
Chapter 1 Echo Adjust/Display Setup
1. Press
.
2. Select [Disp. Setup2] - [W. Temp. Font
size].
3. Press [ ] of
The setup box of [W. Temp. Font size]
display will be displayed.
4. With [▲] and [▼] keys, select W. Temp.
Font size, [Small], [Medium] or [Large]. To
stop the display, select [OFF].
5. Press
to close the menu.
Example of display:
1.13 Displaying of Speed Value/Not to
display
Disp. Setup2 - Speed Value
It is selectable to display the boat speed or
not.
1. Press
.
2. Select [Disp. Setup2] - [Speed Value].
3. Press [ ] of
The setup box of [Speed Value] will be
displayed.
1-20
.
Display of Water
Temperature
.
4. With [▲] and [▼] keys, select [ON] to
display and [OFF] to stop.
5. Press
to close the menu.
Example of display:
Display of Speed Value
1.14 Display of Detection Area/Not to
display
Disp. Setup2 - Detection Area
Approximate detection area by the beam
angle of the transducer in use will be
displayed.
1. Press
.
2. Select [Disp. Setup2] - [Detection Area].
3. Press [ ] of
The setup box of display of [Detection
Area] will be displayed.
4. With [▲] and [▼] keys, select [ON] to
display and [OFF] not to display.
5. Press
to close the menu.
JFC-180BB
.
7ZPNA4619A
Advertisement
Table of Contents
