Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Pixel Sky Pro controller IEC power cable (1,5 m) ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety cable. • When rigging, derigging or servicing the Pixel Sky Pro, always make sure, that the area below the installation site is secured and that there are not any unauthorized people around. Ordercode: 40392...
Page 6
Pixel Sky Pro Controller Pixel Sky Pro LED Curtain One Pixel Sky Pro – Wentex Ordercode: 40392...
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always properly connected to the earth! Improper installation can cause serious injuries and/or damage of property! Ordercode: 40392...
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement from which the obligation is resulting. Ordercode: 40392...
The Pixel Sky Pro is a sky curtain system controller. In order for the whole system to work, you need to purchase both: the Pixel Sky Pro controller (ordercode: 40392) and the Pixel Sky Pro II black LED curtain, including the necessary power box (ordercode: 40395).
04) Power LED indicator 05) RJ45 connector A – IN 06) RJ45 connector B – OUT 07) Signal LED indicator Pixel Sky Pro Controller - Backside Fig. 02 08) RJ45 curtain connectors 1-8 OUT 09) IEC power connector 100-240V IN Ordercode: 40392...
Pixel Sky Pro Power Box Fig. 03 10) 5V DC+ curtain OUT 11) 5V DC curtain OUT 12) Fuse F6AL/250V 13) Pro power connector 100-240V Pixel Sky Pro Curtain Fig. 04 14) Dedicated 5V DC power cables 15) RJ45 signal input connector Ordercode: 40392...
If you wish to connect more than one controller, plug one end of the CAT5 cable into the RJ45 output connector B (06) on controller # 1 and the other end into the RJ45 input connector A (05) on controller # 2. Ordercode: 40392...
Software Setup 01) Once you have installed the Easy Player on your PC, open the software by double clicking on the “Easy Player 2013” shortcut. 02) Go to Settings > Hardware Settings > Display1. 03) Insert the password: showtec. Ordercode: 40392...
Page 14
Pixel Sky Pro Controller 04) Use the following network settings: 05) Go to Layout tab. Now you can see that controller # 1 is active. Click the New Layout button. Ordercode: 40392...
Page 15
06) This is the layout for the 6 x 4 m LED curtain (40395). Use the 2 buttons in the right-hand side corner to determine the input signal direction. You can also adjust the number of pixels. 07) Click the OK button. The following message screen will appear: 08) Click the OK button to confirm. The setup is now complete. Ordercode: 40392...
01) In the Easy Player main menu, check the options marked with circles. 02) Now click the upper Play button to activate your settings. 03) The red area is used for setting up the program, using different movies and/or other visuals available in the menu. Ordercode: 40392...
Page 17
04) The green area is the “live” section. Once you have programmed your show, click the Play button to run it. 05) You should be able to see the mark indicating the screen selection which is going to be grabbed. Ordercode: 40392...
01) Power supply. Check if the controller is plugged into an appropriate power supply. 02) The controller. Return the controller to your Showtec dealer. 03) The LED curtain. Return the LED curtain to your Showtec dealer. 04) The power box. Return the power box to your Showtec dealer.
Page 19
• Turn up the air conditioning • Disconnect the LED curtain and LEDs damaged return it to your Showtec dealer The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary...
Pixel Sky Pro Controller Product Specifications Model: Showtec Pixel Sky Pro Controller (ordercode: 40392) Input voltage: 100-240 VAC, 60/50Hz Power consumption: Data connector: RJ45 IN/OUT Dimensions: 240 x 140 x 45 mm (LxWxH) Weight controller: 1 kg Curtain (ordercode: 40395)