WaterLogic PUREZZA WL2FL FIREWALL Manual page 74

CONTACTLESS – PEDALS
Safety
Waterlogic technical manuals cover voltages of both 120v and 220v for all markets where Waterlogic
operates. Please ensure that you carefully read the information in this manual and for any parts
specific to any market, refer to your technical agreement or specific part listing. The below is not a
step by step working practice and only trained members of staff are to follow these instructions.
Caution! Please ensure the retrofit of Waterlogic foot pedal systems are only carried out by trained
and experienced
technicians. The Waterlogic foot pedal system retrofit is NOT to be carried out by ANYONE who is not
experienced or trained on Waterlogic systems.
Warning! Take extreme caution when working with electricity, safe isolation processes MUST be
followed before carrying out any retrofit work.
Do not operate if damaged! If the machine or supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
What is the Waterlogic Foot Pedal System?
Waterlogic has produced a hands-free solution to help our end customers achieve the highest
hygiene standard in the workplace. Our foot pedals fit most of our dispensers (including Table Tops)
providing access to the same great quality water.
Each pedal operates a water type from cold, sparkling, ambient to hot. Please note that there is not
an "extra hot" pedal. These pedals can be stickered with the water type for easy user selection (labels
provided). For the WL7 one pedal toggles between water types and the other dispenses.
Waterlogic Foot Pedal Specification
WL2FL Manual Page 76 – Revision AUS-04-23