Page 1
WL2FL FIREWALL USER MANUAL Waterlogic Trading LTD, WLI Trading Limited, Second Floor, Suite 4, Beacon Court, Sandyford, Co. Dublin, Ireland Tel: + 353 (0) 1293 1960 Fax: + 353 (0) 1293 1052 For Technical Support Email: support@waterlogicsupport.zendesk.com WLI (UK) LTD – Global Headquarters Grenfell Road, Maidenhead, Berkshire, SL6 1HN, United Kingdom...
Page 2
Products manufactured and marketed by Waterlogic and its affiliates are protected by patents. Waterlogic reserves the right to change the specifications referred to in this Literature at any time, without prior notice. Changes or modifications not expressly approved by Waterlogic could void the warranty and user’s authority to operate the equipment.
TABLE OF CONTENTS USER GUIDE • Safety Alert Symbols ..............4 • Safety Precautions ..............4 • Features and Benefits .............. 7 • Certifications ................8 • Model Designations and General Specifications ..... 9 • Electrical and Shipping Specifications ........10 •...
The installation, maintenance, sanitizing and any repair must be performed by qualified persons trained by Waterlogic International or their approved distributors only. Do not remove any panel or cover to protect against electrical shock and exposure to UV radiation.
Page 5
UV-C emitter if damaged or removed from enclosure. Do not touch or look directly into the faucet. Appliances that are obviously damaged must not be operated. Replacement of the UV-C emitter can not be conducted by the user, please contact Waterlogic for assistance or help finding an Authorized Service Representative.
Page 6
CAUTION! USE A WATER PRESSURE REGULATOR. Waterlogic will not be responsible for injury or damage caused by excessive water pressure. Input or feed pressure must be 2.5 bar (36 psi) to 3.5 bar (51 psi). Be aware of any potential pressure surges caused by building/municipal pumping stations.
WL2FL FEATURES AND BENEFITS Ambient, Cold and Hot Water Cold and Hot Selections, which can be changed to Ambient and Cold settings to meet a wide range of customer demands. High Volume Storage and Water Capacity Free standing model has 4 Litres of Cold Water Capacity and 1.5 litres of Hot Water. Mini model has 2 Litres of Cold Water Capacity and 1.5 litres of Hot Water.
Intertek Labs (ETL) Certified the WL2FL Water Treatment System to ANSI/UL 399 Standard for Drinking Water Coolers. BPA Free - Waterlogic tests for BPA and declares that all of its products are Bisphenol-A FREE and contain no harmful BPA plastics.
SHIPPING SPECIFICATIONS ITEM WL2FL Mini WL2FL Free Standing 34cm x 37cm x 45cm 34cm x 41cm x 104cm Width/Depth/Height 13.5” x 14.5” x 17.75” * 13.5” x 14.5 x 41” Weight (dry) 26.3 kg (58 pounds) 30 kg (66 pounds) ELECTRICAL SPECIFICATIONS 15 Amp Service 120V/60Hz ELECTRICAL SUPPLY...
OPERATING INSTRUCTIONS The above picture shows front LCD display and control panel for the Waterlogic WL2FL. For Cold Water: Press Cold Water Select Button followed by the Dispensing Button (within 3 seconds). For Ambient Water: Press Ambient Water Select Button followed by the Dispensing Button (within 3 seconds).
Need help?
Do you have a question about the WL2FL FIREWALL and is the answer not in the manual?
Questions and answers