Table of Contents
Advertisement
For demonstrative purposes, photos below have lowered the hot tank from the unit.
Press the reset button
6.
Reattach the Protective Metal Box by depressing the top
flap of the Protective Metal Box so it snaps back into its
original position on the Hot Tank.
7.
8.
Replace the Lower Front Panel.
9.
Plug in the Power Cord.
Turn on the Red Compressor/Heater Switch I=ON position
10.
The Hot and Cold tanks must be filled with water BEFORE turning on the
Red Heater and Compressor Switch.
11.
Verify the cooler is fully operational before installing it at the customers' site.
WL2FL Manual
Page 17 – Revision AU27-04-2023
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the PUREZZA WL2FL FIREWALL and is the answer not in the manual?
Questions and answers